How to cut wood: advice from an experienced lumberjack
WHAT DO YOU NEED TO CUT FIREWOOD?
deck
The wood is cut and the logs are placed on a firm and solid foundation. The best for this is a deck - the thickest and knotted part of a sawn tree trunk. Two or three nodes are not to be cut, but are required to leave the deck: with their help it will be easier to transfer from one place to another.
It is very difficult to divide such a deck because the twigs and bends in her body put it together and resist the impacts perfectly.
Cleaver or Cleaver
Experienced woodcutters almost always choose a heavy and boring ax - an ax for breaking down firewood, especially if the trunks are filled with long logs.
You need physical power to rip them, but the ax under its gravity separates the log better. The blunt knife does not jam on the board, but works like a wedge.
However, the ax should not be moved too far into the corner - it is easier to cut short wedges and fresh, raw, recently cut stumps. You will also need to cut the chips for the chips.
HOW TO DO FIREWOOD?
Despite the apparent simplicity of the process, you have to know not to mean too much wood, not to overdo it physically, and not to hurt yourself or others. In addition, how long and how long they will burn will vary, depending on what kind of logs come under your ax.
Definition of the process
Follow the procedure below to make it easier to deal with:
Chipping the edges of a thick log
Place logs on the deck or with most of the nodes below.
Find a crack that is almost always found at the end of the cut log and rotate it.
If there are no cracks, try to hit with an ax or a breaker between the knots or between them. When firewood is poked with an ax, it can get stuck in a log and hit a knot. In this case, the ax with the slab must be bent down and hit with force against the deck.
Very thick stumps are more suitable for sewing not in the middle, but chipping plates near the edges.
Tip: you don't need to apply too much force, you leave the log on the log. Just lift it over your head and reduce it by accelerating - the gravity itself is enough for the cleaver to work.
Security precautions
The ax did not blow the axle handle, but on the eve of shredding firewood, it landed in a water bowl. The toporishche swells and the ax on it will sit tight.
While working, place your feet wide: it's convenient and I miss you by accident.
Make sure no one is nearby, especially children, because firewood can fly away from different directions.
What should the logs be?
If you do not want the firewood to burn very quickly, or when burned to the end, the thickness of the logs should be 7-10 centimeters, leaving the weapons. How is wood separated to do exactly that?
Depends on the thickness of the logs. Thin, divided into two blocks and then each - once again halfway, the so-called chetveriki is obtained.
Firewood splitting plan
The thick cluster must be separated into octal, ie, each quartet is cut. If you get very thick stumps, cut each octagon, but not across the radius, cross to create two smaller stumps: a trihedral, the second tetrahedral.
Plates (heap halves) cannot be divided into two, but may be divided into three three-piece pieces (or two triple-faced and one tetrahedral) to obtain logs of the required thickness.
Tip: wood is the easiest to chop when dry, but it is better to stab when raw wood stays cold. If there is no urgent need, do not rush to plant the freshly emptied green stumps - let them dry or lie under the dome until winter.
How to store firewood?
Do not put the boards in the wood mouth (see Drovnitsa with your own hands immediately after you start cutting). If there is sunny dry air, let the logs slide outdoors, even if the logs are originally dry. If the weather breaks, they should be covered with a tarpaulin, and it is better to put the pinned slide right under the canopy so that unexpected rain does not leave you unaware.
Folded wood in a clean log lies for several years without compromising quality. If the wood is completely fresh during splitting, then it is best to start using it within a year.
We hope our advice will help you cut firewood and not overdo it at the same time. When you first start chopping firewood, do not try to put in a quantitative record immediately. Otherwise, the next day, you can wake up suffering with muscles and bloody calluses on the palms.
HOW DOES THE WOOD CUT SMOOTH? RECOMMENDED TO KNOW EVERYONE!
How to cut wood properly? This problem worries homeowners heated stoves or fireplaces. At first glance the task seems simple, but there are subtleties and nuances. Let's take a closer look at this.
CONTENT
Wood chopping, as some people think, is not an easy task that does not come face to face. It will agree with the approval of those who have attempted to cut the logs. At first glance, everything seems simple, you need to get an ax and start pirating, but there are nuances of how to cut the wood properly. This knowledge and skill comes with experience, but you can get advice and avoid making mistakes. Let's not understand.
Chopped firewood, folded in a garden area for drying
First of all, you should understand what is useful in cutting wood and choosing the right place.
WHAT AND WHERE WOOD WILL BE CUT?
The firewood may be chopped in a conventional manual manner or using a variety of modern mechanical and electrical machines and apparatuses. Let's take a closer look at each option.
Manual chopping firewood
For conventional wood cutting, only one ax is required, because the ax is rarely used and occurs much more slowly. In fact, ax is used to set nodes or chips for ignition.
Best traditional cleaver with wooden handle. They have been used for many years and are often found in villages. Arm with such a handle in front of the firewood of the arm should be left in water for several hours, so that the ax handle does not fly
Conventional wedge models are made with a handle made of wood, but according to existing technologies, they are also produced with a handle made of plastic.
The best fork cleaners are forged or spilled. To have a long service life, you should consider whether an ax is benign. Check with hardening sound. If deaf, this means that the cluster is badly hardened and is a viable option if it rings.
When choosing a cleaver you should pay attention to:
Respectively. He was chosen to be comfortable to hold in his hands.
Hint! As a rule, birch is the best handle because it will be more comfortable to work with than metal or plastic.
Your modern model, Cleaver. Can be made with wooden or plastic handle
The length of the handle and the mass of the ballerina must be chosen individually for each person, thus making it comfortable and convenient. The tool should fit well in your hand, then there is no need to shake 20-30 times more.
Hint! Do not use an ax or ax with a broken wooden handle. It must be submerged in water; use is unsafe. At any moment to fly from the Toporishche stem.
Once Cleaver is selected, you must select a place to drill the tree.
Best of all, a large area where nothing can stop. Once the location is selected, it should be set to "Plate" or "Deck", the knotted bottom of the tree. Best of all, the knots get rid of it for easy transport. This will help equip an equal and sound workplace. It is necessary to establish the "wharf" so that nothing is prevented and that actions are not harmed by humans. This is important because when cutting wood, chips, chips and billets fly in different directions.
2AXX
5.11 51121-019-1SZ Operator Axe, Black, One Size
