How to make firewood easily and easily
The cottage becomes more comfortable if equipped with a stove or fireplace. However, the stove requires fuel to enjoy the heat of the burning fire. It is often played by firewood whose role is a piece of wood.
Chopping
Firewood stoves and fireplaces of country houses and homes are required for heating.
Many homeowners prefer to buy ready-made timber to avoid the need to cut wood. Others like chopping their own wood, which is an excellent opportunity to increase energy and increase your muscle tone. For both, information on how to cut firewood properly can be a good help because this ability is not only necessary for heating the house, but also for making a fire during a hiking trip or a friendly picnic.
Needed to separate wood
Minimum fixtures will be required to obtain suitable and good logs for melting the stove and fireplace. Nevertheless, it is necessary to pay close attention to the quality, because the success of the event will depend on it.
Wood cutting scheme
Wood cutting plan.
Therefore, the base on which the wooden block logs will be placed should be very dense and strong, which will allow the spitting to be performed without damaging the surface. It is best to use decks cut as a log on a daily basis. The deck must be the thickest and most knotted part of the tree.
You can leave two or three teeth suitable for gripping with your hands when cutting so that the deck can be easily moved to the right place of the site. Twisted branches in the tree giving the deck the necessary strength and rigidity.
You also need a sharp ax or an ax to separate the wood - an ax, but just stupid and heavy. Working as an ax is quite difficult because it requires great physical strength and skill. The advantage of Cleaver is that it separates wooden blocks more quickly and successfully because of its own gravity.
If you want to separate large and busy logs, it is better to use a cleaver. As it enters the thickness of the wood, a thick, blunt blade operates on the wedge principle and divides the log into two parts. If thin and newly cut logs are to be split, a sharp ax will be necessary. You will also need a sharp knife when you need to plan wood chips for the chip.
Wood chopping rules
Use of a wedge to cut firewood
Use a wedge to cut wood.
Although the firewood cutting process does not seem too complicated and many believe that the success depends entirely on the availability of physical strength, several basic rules need to be known for achieving smooth and well-burning wood. To avoid hurting anyone and causing accidental injury when cutting logs, you should use the following recommendations:
Before you start cutting wood, you should take an ax, make a wave, choose the most comfortable position for the job, get used to the weight of the tool and the deck.
It is recommended that you wear gloves that can protect your hands and hands from injury. It should be noted that even in the case of large amounts of work, even the most durable gloves can break in two or three days. Sometimes several gloves should be worn at the same time to protect the joints of the fingers from the vibration that occurs when the ax knife enters the thickness of the wood.
In order for chips or axes to throw stumps, they could not damage the legs, you must protect them with boots or beret made of dense material.
It is necessary to leave the compartment regularly and clean the floor under your feet from chips and pieces of wood accumulated on it, which can burn in the most appropriate time.
However, in addition to safety, you should consider how you should not spend all your physical power in the process of firewood separation. Therefore, you should examine each record carefully and evaluate its capabilities.
For example, if the block has several twisted branches, it is very difficult to divide it. In this case, the best option is to throw the chock aside and do it when the rest of the work is completed.
It is better to use a cleaver that can be divided into several parallel plates. And then these plates are thin with a sharp knife and can even be cut into wood. The same technique should be used when cutting wedges with knots: first, the knotted sheets are cut from the billet and then the whole billet is divided into several parts.
Back to table of contents
Ax and wood splitting technique when working with ax
Both professionals and beginners should follow a particular division technique:
Device ax chopping wood
Ax cutting device.
When working with a sharp knife, great attention should be paid to positioning the arms. So, you should support the log on the deck with your left hand, side by side and have only the grooves on the base of the thumb base.
The Churbak separating the tractor is usually quite large and does not require support. The main thing here is to place the log fixed on the deck and strike so that it does not fall. You can use the following technique: first to the center, then to the furthest from the plane of the slab and finally to - close. If you change the order of actions, you can damage the ax.
In very active actions or sharp cutting of the ax knife, the ax can fly from the handle. To prevent this from happening, experts recommend immersing a tool in water before starting work: the ax handle swells and does not allow the blade to fly.
If you put a log on a deck, you'll want to pay attention to the end. Generally, well-dried barges have cracks. It is recommended to hit with an ax on it - it is easier to split the wood. When there are no cracks usually found in svezhespilennyh trees, you should hit according to the technique described above.
If you cut a firewood, if an ax or splinter knife falls into a knot and cannot be released, you must use the following method: As a rule, after one or several strokes, the knife is released.
If firewood needs splitting quickly, you can use the information provided. Even people who do not hold any ax in their hands, point out that the ability to separate wood is very fast. You just need to cut a few logs and then it goes like clockwork.
6AXX
Task Tools T35516 Axe & Hatchet Sharpening Stone
