Gerber Gator Combo Axe II [22-41420]

How to Cut Wood? Do It Yourself

Tips

It is not enough to have all the necessary equipment for the construction of wooden structures, but it is also useful to know how to work and finish in the best way. In light of this, suppose great relevance is handcrafted and technical. In addition to precision, this wood cutting can benefit from real art. This requires precision to avoid errors and waste. Here are some tips on cutting wood.

Necessary
Walrus to fix the wooden board
Wood boards
Well sharpened saw

Before focusing on the cut, first make sure that the board is securely locked to the work bench. It is good to lose a few minutes in this procedure to ensure that the axis does not move: the smallest movement can actually cause irregular cuts, or worse, risk of damaging us. After this pre-treatment we select the right saw. The most important part of the saw is preferably a blade made of hardened and well sharpened steel. It should be noted that from time to time, the inclination of the teeth during the cutting stage will be adjusted to facilitate deep penetration.

It is necessary to pay close attention to the course of wood fibers to cut. A skilled craftsman knows well that he can utilize up to two cutting techniques: the cutting edges, the method most commonly referred to as the cut cut, which does not damage the saw teeth and is not chipped, includes edges that are parallel to the wood fibers; and then the abrasive cutting technique that does not separate the fibers but breaks down instead. It is important to progress gradually during the cutting phase: in fact this will allow you to become familiar with the axis and help define the direction of the fibers. Only when the correct cutting point is detected can the knife be maintained perpendicular to the line we have drawn previously. In this way, it is possible to cut the wood using all the teeth of the saw.

The heat caused by the saw teeth rubbing against the wood requires lubrication from time to time to facilitate the sliding of the blade. You can use wax wax, but it is ideal to use different types of saws in various process stages. The best sequence is as follows: Do we use? rectangular and with a round handle to indicate the cut; Can you intervene on the classic saw immediately? or called "saracco" with a trapezoidal knife and handle; For nonlinear segments at the end? Ideal for gouging, environmental saws and ideal for not permanently leaving the switching at the start indicated by the veneer saw.

Thanks to the small details provided so far, wood cutting will prove to be a simple and natural movement. Obviously, wood cutting can also be done without opting for the manual system. Today, there are a number of briquette tools in specialized shops that allow you to cut wood quickly and perfectly, and the best is the circular table saw that makes the process easier. This technique is ideal for making objects consisting of various parts such as a desk or drawer chest.


3AXX
Gerber Gator Combo Axe II [22-41420]